LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback i, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Airbag System) >> Satellite Safing Sensor >> Removal

Satellite Safing Sensor: Removal

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
  3. Remove the rear seat cushion. <Ref. to REMOVAL , Rear Seat . >
  4. Remove the cover.
    Fig 1: Identifying Cover
    G05663293Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the nuts to remove the satellite safing sensor.
    Fig 2: Identifying Nuts And Satellite Safing Sensor
    G05663294Courtesy of SUBARU OF AMERICA, INC.
    CAUTION: Do not separate the satellite safing sensor and bracket. It cause the airbag system malfunction. If the sensor is removed from the bracket, replace them with new parts.
  6. Disconnect the airbag connector.
scientia non olet · About LEMON Manuals