Ignition Timing: Inspection

WARNING: This page is about a different variant/trim than selected.

Before checking the ignition timing, check the following item:
1. Check the air cleaner element is free from clogging, spark plugs are in good condition, and hoses are connected properly.
2. Check the malfunction indicator light does not illuminate.
Warm-up the engine.
When checking the ignition timing, connect the timing light to the #1 cylinder spark plug cord and illuminate the timing mark with the timing light.
Start the engine and check the ignition timing at idle speed as shown below.
Ignition timing [BTDC/rpm]: 10°±8°/650 (MT Model)

15°±8°/700 (AT model)

Fig 1: Checking Ignition Timing At Idle Speed
Courtesy of SUBARU OF AMERICA, INC.

If the timing is not correct, check the ignition control system. <Ref. to BASIC DIAGNOSTIC PROCEDURE . >