LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback XT Limited, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4DOTC) >> Drive Cycle >> Procedure >> Drive Cycle E

Drive Cycle E

  1. Make sure that the battery voltage is 10.9 V or more.
  2. Perform the Clear Memory Mode. < Ref. to CLEAR MEMORY MODE . >
  3. Drive the vehicle for the distance equal to the fuel of 30 0 (7.9 US gal, 6.6 lmp gal).
    NOTE:
    • It is acceptable to drive the vehicle intermittently.
    • Do not disconnect the battery terminals while diagnosing. (Data will be cleared by disconnecting the battery terminals.)
DIAGNOSTIC TROUBLE CODE (DTC) CHART

DTC Item Condition
P0461 Fuel Level Sensor "A" Circuit Range/Performance -
scientia non olet · About LEMON Manuals