LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback R L.L. Bean Edition >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (5AT) >> Front Differential Assembly >> Disassembly >> Differential Case Assembly

Differential Case Assembly

  1. Remove the taper roller bearing using the ST and a press.

    ST 498077000 REMOVER

    Fig 1: Removing Taper Roller Bearing
    G05002714Courtesy of SUBARU OF AMERICA, INC.
  2. Secure the case in a vise, remove the hypoid driven gear tightening bolts, and then separate the hypoid driven gear into case (RH) and case (LH).
    Fig 2: Removing Hypoid Driven Gear Tightening Bolts
    G05668905Courtesy of SUBARU OF AMERICA, INC.
  3. Pull out the straight pin and shaft, and then remove the differential bevel gear, washer and differential bevel pinion.
    Fig 3: Pulling Out Straight Pin And Shaft
    G05668906Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals