LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback R L.L. Bean Edition >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H6DO) >> Drive Cycle >> Procedure >> Drive Cycle F

Drive Cycle F

  1. Check that the engine coolant temperature at engine start is less than 30°C (86°F).
  2. Start the engine, and warm it up until engine coolant temperature reaches to 95°C (203°F) or more.
  3. After the engine has reached the state of procedure 2), idle the engine for 10 minutes or more.
    NOTE: Do not disconnect the battery terminals while diagnosing. (Data will be cleared by disconnecting the battery terminals.)
DRIVE CYCLE F REFERENCE CHART

DTC Item Condition
P0111 Intake Air Temperature Sensor 1 Circuit Range/Performance -
scientia non olet · About LEMON Manuals