LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System >> Front Sub Sensor >> Removal

Front Sub Sensor: Removal

  1. Turn the ignition switch to OFF.
  2. Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
  3. Remove the front bumper face. < Ref. to FRONT BUMPER FACE , REMOVAL, Front Bumper . >
  4. Remove the bolt, and then detach the front sub sensor.
    Fig 1: Identifying Front Sub Sensor Bolt
    G05020510Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from front sub sensor.
scientia non olet · About LEMON Manuals