LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Automatic Transmission (4AT)) >> Transmission Control Module (TCM) >> Installation

Transmission Control Module (TCM): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the TCM.

    Tightening torque: 

    7.5 N.m (0.76 kgf-m, 5.5 ft-lb) 

    Fig 1: Identifying Transmission Control Module (TCM) And Brake Pedal
    G05668331Courtesy of SUBARU OF AMERICA, INC.
  2. Connect the connector to the TCM.
  3. Install in the reverse order of removal.
  4. Execute the learning control promotion. < Ref. to FACILITATION OF LEARNING CONTROL , OPERATION, Subaru Select Monitor. >