LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Automatic Transmission (4AT)) >> Extension Case >> Disassembly >> Mp-T Model

Mp-T Model

WARNING: This page is about a different variant/trim than selected.
  1. Hit the edges of the rear drive shaft lightly with a plastic hammer, and take out the transfer clutch.
    NOTE: Be careful not to damage the oil seal of the extension case.
    Fig 1: Removing Transfer Clutch
    G05668356Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the transfer clutch pipe while being careful not to deform the pipe.
    Fig 2: Identifying Transfer Clutch Pipe
    G05668357Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the dust cover from extension case.
  4. Remove the oil seal from the extension case.
scientia non olet · About LEMON Manuals