LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Power Assisted System (Power Steering)) >> Steering Gearbox >> Inspection >> Service Limit

Service Limit

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Make a measurement as follows. If it exceeds the specified service limit, adjust or replace.

NOTE: When making a measurement, vise the gearbox using ST. Never vise the gearbox by inserting aluminum plates, etc. between vise and gearbox.

ST1 926200000 STAND

ST2 34199AG000 BOSS D

Sliding resistance of rack shaft: 

Service limit 

400 N (41 kgf, 90 lb) or less 

Fig 1: Identifying Sliding Resistance Of Rack Shaft (1 Of 2)
G03833151Courtesy of SUBARU OF AMERICA, INC.
Fig 2: Identifying Sliding Resistance Of Rack Shaft (2 Of 2)
G03833152Courtesy of SUBARU OF AMERICA, INC.