LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Front Suspension) >> General Description >> Preparation Tool >> Special Tool

Special Tool

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL

ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
Fig 1 927380002 ADAPTER Used as an adapter for camber & caster gauge when measuring camber and caster.
  1. 28199AC000 PLATE
  2. 28199AC010 BOLT
Fig 2 927680000 INSTALLER & REMOVER SET Used for replacing the front arm front bushing.
Fig 3 20299AG000
(Newly adopted tool)		 REMOVER Used for replacing the front arm rear bushing. Used with BASE (20999AG010).
Fig 4 20299AG010
(Newly adopted tool)		 BASE Used for replacing the front arm rear bushing. Used with REMOVER (20999AG000).
Fig 5 20299AG020
(Newly adopted tool)		 STUD BOLT SOCKET Used for removing and installing the stud bolt for front arm installing portion.
Fig 6 20399AG000
(Newly adopted tool)		 STRUT MOUNT SOCKET Used for disassembling and assembling the strut mount.
Fig 1: Identifying Special Tool ST-927380002
G03832261Courtesy of SUBARU OF AMERICA, INC.
Fig 2: Identifying Special Tool ST-927680000
G03832262Courtesy of SUBARU OF AMERICA, INC.
Fig 3: Identifying Special Tool ST20299AG000
G03832263Courtesy of SUBARU OF AMERICA, INC.
Fig 4: Identifying Special Tool ST20299AG010
G03832264Courtesy of SUBARU OF AMERICA, INC.
Fig 5: Identifying Special Tool ST20299AG020
G03832265Courtesy of SUBARU OF AMERICA, INC.
Fig 6: Identifying Special Tool ST20399AG000
G03832266Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals