Rear Bushing

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Scribe an aligning mark on the front arm based on the center of rear bushing recess portion.
CAUTION: Always put an alignment mark for aligning the position on bushing installation.

Fig 1: Identifying Alignment Mark
Courtesy of SUBARU OF AMERICA, INC.
Using the ST and a press, remove the rear bushing.
ST1 20299AG000 REMOVER

ST2 20299AG010 BASE

Fig 2: Removing Rear Bushing
Courtesy of SUBARU OF AMERICA, INC.