Rear Bushing

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install the rear bushing with its longer inner cylinder faced upward and its shorter one faced downward and protruding part rearward as shown in Fig 1 .

Fig 1: Installing Rear Bushing
Courtesy of SUBARU OF AMERICA, INC.
Align the center of rear bushing recess portion with the aligning mark on the front arm.

Fig 2: Identifying Alignment Mark
Courtesy of SUBARU OF AMERICA, INC.
Using the ST and a press, install the rear bushing.

ST1 20299AG000 REMOVER

ST2 20299AG010 BASE

Fig 3: Installing Rear Bushing Using ST

Courtesy of SUBARU OF AMERICA, INC.