LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Tire Pressure Monitoring System (Diagnostics)) >> Subaru Select Monitor >> Operation >> Clear Memory

Clear Memory

WARNING: This page is about a different car, the 2006 Subaru Outback, 2006 Subaru Legacy, and 2006 Saab 9-2X. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the «Main Menu» screen, select {2. Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select the {Tire Pressure Monitor} and press the [YES] key.
  3. Press the [YES] key after the {Tire Pressure Monitor} is displayed.
  4. On the «Tire Pressure Monitor Diagnosis» display screen, select the {Clear Memory} and press the [YES] key.
  5. When "Done" and "Turn ignition switch OFF" is shown on the display screen, turn the Subaru Select Monitor and ignition switch OFF.
    NOTE: For details concerning the operation procedures, refer to the "Subaru Select Monitor Operation Manual".
scientia non olet · About LEMON Manuals