LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Wheel And Tire System) >> Steel Wheel >> Removal

Steel Wheel: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the parking brake, and position select lever to "P" or "LOW".
  2. Set the shop jacks or a lift to the specified points, and support the vehicle with its wheels slightly contacting the floor.
  3. Loosen the wheel nuts.
  4. Raise the vehicle until its wheels are off the ground using the jack or a lift.
  5. Remove the wheel nuts and wheels.
    NOTE:
    • When removing the wheels, be careful not to damage the hub bolts.
    • Place the wheels with their outer sides facing upward to prevent wheels from being damaged.
scientia non olet · About LEMON Manuals