LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Lighting System) >> Turn Signal Light and Hazard Light System >> Inspection >> Hazard Switch

Hazard Switch

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Measure the resistance between hazard switch terminals.

Fig 1: Identifying Hazard Switch Terminals
G05022447
RESISTANCE SPECIFICATION CHART

Switch position Terminal No. Standard
OFF 2 and 3 1 MΩ or more
ON Less than 1 Ω
scientia non olet · About LEMON Manuals