Transmission Case Assembly
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
Drive pinion shim adjustment
Hypoid gear backlash:
0.13 - 0.18 mm (0.0051 - 0.0071 in)
DRIVE PINION SHIM THICKNESS SPECIFICATIONS
| Drive pinion shim | |||
|---|---|---|---|
| Part number | Thickness mm (in) | Part number | Thickness mm (in) |
| 32295AA031 | 0.150 (0.0059) | 32295AA071 | 0.250 (0.0098) |
| 32295AA041 | 0.175 (0.0069) | 32295AA081 | 0.275 (0.0108) |
| 32295AA051 | 0.200 (0.0079) | 32295AA091 | 0.300 (0.0118) |
| 32295AA061 | 0.225 (0.0089) | 32295AA101 | 0.500 (0.0197) |
Selection of main shaft rear plate
MAIN SHAFT REAR PLATE REFERENCE
| Main shaft rear plate | ||
|---|---|---|
| Dimension "A" mm (in) | Part number | Mark |
| 4.00 - 4.13 (0.1575 - 0.1626) | 32294AA041 | 1 |
| 3.87 - 3.99 (0.1524 - 0.1571) | 32294AA051 | 2 |