Extension Assembly
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
Amount of standard protrusion of the taper roller bearing outer race
0.2 - 0.3 mm (0.008 - 0.012 in)
NOTE:
Be sure that the amount of protrusion is always within the standard.
THRUST WASHER THICKNESS SPECIFICATIONS
| Thrust washer (50 x 61 x t) | |
|---|---|
| Part number | Thickness mm (in) |
| 803050060 | 0.50(0.0197) |
| 803050061 | 0.55(0.0217) |
| 803050062 | 0.60 (0.0236) |
| 803050063 | 0.65 (0.0256) |
| 803050064 | 0.70 (0.0276) |
| 803050065 | 0.75 (0.0295) |
| 803050066 | 0.80(0.0315) |
| 803050067 | 0.85 (0.0335) |
| 803050068 | 0.90 (0.0354) |
| 803050069 | 0.95 (0.0374) |
| 803050070 | 1.00 (0.0394) |
| 803050071 | 1.05(0.0413) |
| 803050072 | 1.10(0.0433) |
| 803050073 | 1.15(0.0453) |
| 803050074 | 1.20 (0.0472) |
| 803050075 | 1.25(0.0492) |
| 803050076 | 1.30(0.0512) |
| 803050077 | 1.35(0.0531) |
| 803050078 | 1.40(0.0551) |
| 803050079 | 1.45(0.0571) |
Thrust washer to center differential side clearance:
0.15 - 0.35 mm (0.0059 - 0.0138 in)
THRUST WASHER THICKNESS SPECIFICATIONS
| Thrust washer | |
|---|---|
| Part number | Thickness mm (in) |
| 803036050 | 0.9 (0.035) |
| 803036054 | 1.0(0.039) |
| 803036051 | 1.1 (0.043) |
| 803036055 | 1.2(0.047) |
| 803036052 | 1.3(0.051) |
| 803036056 | 1.4(0.055) |
| 803036053 | 1.5(0.059) |
| 803036057 | 1.6(0.063) |
| 803036058 | 1.7 (0.067) |