LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Manual Transmission And Differential 5MT) >> Front Differential Assembly >> Removal

Front Differential Assembly: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the manual transmission assembly from the vehicle. < Ref. to REMOVAL , Manual Transmission Assembly. >
  2. Remove the transfer case together with the extension case assembly. < Ref. to REMOVAL , Transfer Case and Extension Case Assembly. >
  3. Remove the transmission case. < Ref. to REMOVAL , Transmission Case. >
  4. Remove the drive pinion shaft assembly. < Ref. to REMOVAL , Drive Pinion Shaft Assembly. >
  5. Remove the main shaft assembly.

    < Ref. to REMOVAL , Main Shaft Assembly for Single-range. >

  6. Remove the differential assembly.
    NOTE:
    • Do not confuse the right and left roller bearing outer races.
    • Be careful not to damage the oil seal of retainer.
      Fig 1: Removing Differential Assembly
      G05003046
  7. Remove the differential side retainers using ST.

    ST 499787000 WRENCH ASSY

    Fig 2: Removing Differential Side Retainers Using Wrench Assy ST 499787000
    G05003051
scientia non olet · About LEMON Manuals