LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Manual Transmission And Differential 5MT) >> Front Differential Assembly >> Disassembly >> Differential Case Assembly

Differential Case Assembly

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the twelve bolts and remove hypoid driven gear.
    Fig 1: Identifying Hypoid Driven Gear Components
    G05020056
  2. Drive out the straight pin from differential assembly toward hypoid driven gear side.

    ST 899904100 REMOVER

    Fig 2: Removing Straight Pin From Differential Assembly Using Remover ST 899904100
    G05003108
  3. Pull out the pinion shaft, and remove the differential bevel pinion, bevel gear and washer.
    Fig 3: Identifying Pinion Shaft, Bevel Pinion, Bevel Gear And Washer
    G05020058
  4. Using the ST, remove the roller bearing.

    ST 899524100 PULLER SET

    Fig 4: Removing Roller Bearing Using Puller Set ST 899524100
    G05003110
scientia non olet · About LEMON Manuals