VDC Indicator Light Does Not Go Off
WARNING: This page is about a different car, the 2006 Subaru Outback, 2006 Subaru Legacy, and 2006 Saab 9-2X. However, it is still accessible from the selected car via links, so may be relevant.
DETECTING CONDITION:
- Defective combination meter
- Defective CAN communication
TROUBLE SYMPTOM:
When starting the engine, VDC indicator light is kept ON.
DIAGNOSIS PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 READ DTC. Read the DTC. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) . > |
Is DTC displayed? | Perform the diagnosis according to DTC. | Go to step 2. |
| 2 CHECK LAN SYSTEM. Perform the diagnosis for LAN system. < Ref. to OPERATION , Read Diagnostic Trouble Code (DTC). > |
Is there any fault in LAN system? | Perform the diagnosis according to DTC for LAN system. | Go to step 3. |
| 3 CHECK COMBINATION METER. Check the combination meter. |
Is combination meter OK? | Replace the VDCCM&H/U. | Repair the combination meter. |