LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Security And Locks) >> Rear Inner Remote >> Removal

Rear Inner Remote: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear door trim. < Ref. to REMOVAL , Door Trim. >
  2. Remove the back cover (1) of inner remote.
  3. Remove the cable (2).
  4. Remove the cable end ball (3).
  5. Remove screws (4), and remove the inner remote handle.
    Fig 1: Identifying Inner Remote Handle Screws, Cable End Ball And Cable
    G05022801
scientia non olet · About LEMON Manuals