Turbine Speed Sensor 1: Installation
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Install the turbine speed sensor 1.
Tightening torque:
7 N.m (0.7 kgf-m, 5.2 ft-lb)
- Connect the turbine speed sensor 1 connector.
- Install the intercooler. (Turbo model)< Ref. to INSTALLATION , Intercooler. >
- Install the air intake chamber. (Non-turbo model) < Ref. to INSTALLATION , Air Intake Chamber. >