Reduction Driven Gear: Disassembly

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Remove the ball bearing from reduction driven gear using ST.
ST 498077300 REMOVER

Fig 1: Identifying Ball Bearing
Remove the ball bearing on the reverse side with the same procedure as step 1).
ST 498077300 REMOVER

Fig 2: Identifying Ball Bearing
Remove the snap ring of the parking gear.

Fig 3: Identifying Snap Ring Of Parking Gear
Using the ST, remove the parking gear.
ST 18767AA000 REMOVER

Fig 4: Identifying Parking Gear Remover