LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Automatic Transmission 5AT) >> Extension Case >> Installation

Extension Case: Installation

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Attach the selected reduction driven gear shim to end surface of reduction driven gear with Vaseline. < Ref. to ADJUSTMENT , Reduction Driven Gear. >
  2. Install the extension case.
    NOTE: Use a new gasket.

    Tightening torque: 25 N.m (2.5 kgf-m, 18 ft-lb) 

    Fig 1: Identifying Extension Case
    G05022239
  3. Install the rear vehicle speed sensor.

    Tightening torque: 7 N.m (0.7 kgf-m, 5.2 ft-lb) 

    Fig 2: Identifying Rear Vehicle Speed Sensor
    G05022238
  4. Install the transmission assembly.

    < Ref. to INSTALLATION , Automatic Transmission Assembly. >

scientia non olet · About LEMON Manuals