LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Automatic Transmission 5AT) >> Center Differential Carrier >> Disassembly

Center Differential Carrier: Disassembly

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seal ring.
    Fig 1: Identifying Seal Ring
    G05022321
  2. Using a press and ST, remove the ball bearing.

    ST 498077600 REMOVER

    Fig 2: Identifying Ball Bearing
    G05002644
  3. Remove the snap ring, and pull out the shaft from center differential assembly.
    Fig 3: Identifying Shaft From Center Differential Assembly
    G05022323
  4. Remove the thrust washers, pinion gears and washers from center differential assembly.
    Fig 4: Identifying Pinion Gears And Washers
    G05022324
  5. Pull out the intermediate shaft and thrust bearing.
scientia non olet · About LEMON Manuals