Data Link Connector: Note
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
This connector is used for Subaru Select Monitor.
CAUTION:
Do not connect any scan tools except Subaru Select Monitor or general scan tool because the circuit for Subaru Select Monitor may be damaged.
DATA LINK CONNECTOR SPECIFICATIONS
| Terminal No. | Remarks | Terminal No. | Remarks |
|---|---|---|---|
| 1 | Power supply | 9 | Blank |
| 2 | Blank | 10 | Subaru Select Monitor signal |
| 3 | Blank | 11 | Blank |
| 4 | Blank | 12 | Ground |
| 5 | Blank | 13 | Ground |
| 6 | Blank | 14 | Blank |
| 7 | Blank | 15 | Blank |
| 8 | Blank | 16 | Blank |