LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Ignition (H4DOTC)) >> Spark Plug >> Removal >> RH Side

RH Side

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the air cleaner case.

    < Refer to REMOVAL , Air Cleaner Case . >

  4. Disconnect the connector from ignition coil.
  5. Remove the ignition coil.
    NOTE: Turn #3 ignition coil by 180 degrees to remove it.
    Fig 2: Locating Ignition Coil Connector (Right Side)
    G05017746Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the spark plug with a spark plug socket.