LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Automatic Transmission (Diagnostics) 4AT) >> Subaru Select Monitor >> Operation >> Clear Memory Mode

Clear Memory Mode

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the «Main Menu» display screen, select the {Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select the {Transmission} and press the [YES] key.
  3. Press the [YES] key after the information of transmission type is displayed.
  4. On the «Transmission Diagnosis» display screen, select the {Clear Memory} and press the [YES] key.
NOTE: If {Clear Memory 2} is selected and performed, DTC and learned control memory are cleared. If Clear Memory 2 is performed, execute the advance operation of learning control. < Ref. to FACILITATION OF LEARNING CONTROL , OPERATION, Subaru Select Monitor. >
scientia non olet · About LEMON Manuals