LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Mechanical (H4DOTC)) >> Cylinder Block >> Disassembly

Cylinder Block: Disassembly

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Connecting Rod Bearing And Cap, Second Ring, Oil Ring, Top Ring And Snap Ring
G05339539Courtesy of SUBARU OF AMERICA, INC.
  1. Remove the connecting rod cap.
  2. Remove the connecting rod bearing.
    NOTE: Arrange the removed connecting rod, connecting rod cap and bearing in order, to prevent confusion.
  3. Remove the piston rings using piston ring expander.
  4. Remove the oil ring by hand.
    NOTE: Arrange the removed piston rings in good order to prevent confusion.
  5. Remove the snap ring.
scientia non olet · About LEMON Manuals