Oil Pressure Switch: Installation

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Apply liquid gasket to the oil pressure switch threads.
Liquid gasket:

Three bond 1324 (Part No.004403042) or equivalent

Fig 1: Applying Liquid Gasket To Oil Pressure Switch Threads
Install the oil pressure switch onto engine block.
Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)

Fig 2: Identifying Oil Pressure Switch
Connect the terminal to the oil pressure switch.

Fig 3: Connecting Terminal Of Oil Pressure Switch
Install the generator to the bracket. < Ref. to INSTALLATION , Generator. >