Master Cylinder: Removal
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Thoroughly drain the brake fluid from the reservoir tank.
- Remove the snap pin and clevis pin, and then separate the push rod of the master cylinder from clutch pedal.
- Remove the air intake chamber. < Ref. to REMOVAL , Air Intake Chamber. >
- Remove the clutch pipe from the master cylinder.
- Remove the master cylinder and reservoir tank as a unit.CAUTION: Be careful not to spill the brake fluid. Brake fluid spilled on the vehicle body will harm the paint surface; wipe off quickly if spilled.