Clutch Switch (With Cruise Control)
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Install so that there is a gap of 0 mm (0 in) of the clutch switch and clutch pedal stopper.
Tightening torque:
8 N.m (0.8 kgf-m, 5.8 ft-lb)
- Measure the stroke of the clutch pedal.
Clutch pedal standard full stroke: A
Non-turbo model
130 - 135 mm (5.12 - 5.31 in)
Turbo model
135 - 140 mm (5.31 - 5.51 in)
- If the clutch pedal stroke is out of specification, adjust the stroke. < Ref. to ADJUSTMENT , Clutch Pedal. >
- Connect the clutch switch connector.