Clutch Switch: Adjustment

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the lock nut of clutch switch (clutch start).

Fig 1: Loosening Lock Nut Of Clutch Switch (Clutch Start)
Fully depress the clutch and hold it.
Adjust the gap of the clutch pedal plate and the clutch switch to be 2 - 2.5 mm (0.08 - 0.10 in).

Fig 2: Identifying Gap Between Clutch Pedal Plate And Clutch Switch
Tighten the lock nut.
Tightening torque:

8 N.m (0.8 kgf-m, 5.8 ft-lb)