LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Clutch System) >> Clutch Pedal >> Disassembly

Clutch Pedal: Disassembly

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the clutch switches.
  2. Remove the clip, assist spring, rod and bushing.
    Fig 1: Identifying Clip, Assist Spring, Rod And Bushing
    G05020147
  3. Extract the spring pin and remove the lever.
    Fig 2: Identifying Spring Pin And Lever
    G05020148
  4. Remove the clutch pedal and bushing.
    Fig 3: Identifying Clutch Pedal And Bushing
    G05020149
  5. Remove the stopper, clip and rod S, and remove the spring and bushing S.
    Fig 4: Identifying Stopper, Clip And Rod S
    G05020150
  6. Remove the stopper from the clutch pedal.
  7. Remove the clutch pedal pad.
scientia non olet · About LEMON Manuals