LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Automatic Transmission 4AT) >> Reduction Driven Gear >> Removal

Reduction Driven Gear: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission assembly from vehicle body. < Ref. to REMOVAL , Automatic Transmission Assembly. >
  2. Remove the rear wheel speed sensor, and separate the extension case from transmission case. < Ref. to REMOVAL , Extension Case. >
  3. Set the range select lever to the "P" range.
  4. Lift the crimped section, and then remove the lock nut.
    Fig 1: Identifying Select Lever Ranges
    G05021911Courtesy of SUBARU OF AMERICA, INC.
  5. Using the ST1 and ST2, extract the reduction driven gear.

    ST1 499737000 PULLER

    ST2 899524100 PULLER SET

    Fig 2: Identifying Reduction Driven Gear
    G05021912Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals