LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Automatic Transmission 4AT) >> Reduction Driven Gear >> Disassembly

Reduction Driven Gear: Disassembly

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the snap ring from reduction driven gear.
    Fig 1: Identifying Snap Ring
    G05021914Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the ball bearing from reduction driven gear using ST.

    ST 498077600 REMOVER

    Fig 2: Identifying Ball Bearing
    G05021915Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the snap ring from reduction driven gear.
scientia non olet · About LEMON Manuals