LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Airbag System) >> Side Airbag Sensor >> Removal

Side Airbag Sensor: Removal

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
  3. Remove the front outer seat belt. <Ref. to OUTER SEAT BELT ASSEMBLY , REMOVAL, Front Seat Belt . >
  4. Remove the nuts to remove the side airbag sensor.
    Fig 1: Locating Nuts And Side Airbag Sensor
    G05663291Courtesy of SUBARU OF AMERICA, INC.
    CAUTION: Do not separate the side airbag sensor and bracket. It cause the airbag system malfunction. If the sensor is removed from the bracket, replace them with new parts.
  5. Disconnect the airbag connector.
scientia non olet · About LEMON Manuals