LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Controls - Engine (Diagnostics) (H4SO)) >> Read Diagnostic Trouble Code (DTC) >> Operation >> SUBARU Select Monitor (Normal Mode)

SUBARU Select Monitor (Normal Mode)

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the «Main Menu» display screen, select the {Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select the {Engine Control System} and press the [YES] key.
  3. Press the [YES] key after the information of engine type has been displayed.
  4. On the «Engine Diagnosis» screen, select the {DTC Display}, and then press the [YES] key.
  5. On the «Diagnostic Code(s) Display» screen, select the {Current Diagnostic Code(s)} or {History Diagnostic Code(s)}, and then press the [YES] key.
    NOTE:
    • For detailed operation procedure, refer to the "Subaru Select Monitor Operation Manual".
    • For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)".

      < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >

scientia non olet · About LEMON Manuals