LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Controls - Engine (Diagnostics) (H4SO)) >> Drive Cycle >> Procedure >> Preparation For Drive Cycle

Preparation For Drive Cycle

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 l  (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
  2. After performing the diagnostics and clearing the memory, check for any remaining unresolved trouble data. < Ref. to CLEAR MEMORY MODE . >
  3. Disconnect the test mode connectors.
    NOTE:
    • Perform the diagnosis after warming up the engine except when the engine coolant temperature at starting is specified.
    • Perform the diagnosis twice if the DTC marked with *. After completing the first diagnosis, stop the engine and perform second diagnosis in same condition.
scientia non olet · About LEMON Manuals