Drive Cycled
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- DRIFT DIAGNOSIS
- Make sure that the engine coolant temperature at engine starting is less than 30°C (86°F).
- Make sure that fuel remains 9.6 l or more (2.5 US gal, 2.1 Imp gal) and the battery voltage is 10.9 V or more.
- Make sure that the engine coolant temperature rises for more than 10°C (50°F) from the level of engine starting and is also above 75°C (167°F).
- Idle the engine for more than 120 seconds in the condition of step 3.
- STUCK DIAGNOSIS
- Make sure that the battery voltage is more than 10.9 V.
- Perform the Clear Memory Mode. < Ref. to CLEAR MEMORY MODE . >
- Drive the vehicle for the distance equal to the fuel of 50 l
(13.2 US gal, 11 Imp gal).NOTE:
- It is acceptable to drive the vehicle intermittently.
- Do not disconnect the battery terminals while diagnosing. (Data will be cleared by disconnecting the battery terminals.)
DTC CHART
| DTC | Item | Condition |
|---|---|---|
| P0181 | Fuel Temperature Sensor "A" Circuit Range/Performance | - |