LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Controls - Engine (Diagnostics) (H4SO)) >> Drive Cycle >> Procedure >> Drive Cycle E

Drive Cycle E

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make sure that the battery voltage is more than 10.9 V.
  2. Perform the Clear Memory Mode. < Ref. to CLEAR MEMORY MODE . >
  3. Drive the vehicle for the distance equal to the fuel of 30 l  (7.9 US gal, 6.6 Imp gal).
    NOTE:
    • It is acceptable to drive the vehicle intermittently.
    • Do not disconnect the battery terminals while diagnosing. (Data will be cleared by disconnecting the battery terminals.)
DTC CHART

DTC Item Condition
P0461 Fuel Level Sensor "A" Circuit Range/Performance -
scientia non olet · About LEMON Manuals