Rear Bushing

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Put an alignment mark on the front arm based on the center of rear bushing recess portion.
CAUTION: Always put an alignment mark for aligning the position on bushing installation.

Fig 1: Identifying Alignment Mark On Front Arm
Courtesy of SUBARU OF AMERICA, INC.
Using the ST and a press, remove the rear bushing.

ST1 20299AG000 REMOVER

ST2 20299AG010 BASE

Fig 2: Removing Rear Bushing

Courtesy of SUBARU OF AMERICA, INC.