LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Power Steering System) >> Universal Joint >> Inspection

Universal Joint: Inspection

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for wear, damage or any other faults. Replace as necessary

    Service limit: 

    Universal joint play: 0 mm (0 in) 

    Maximum swing torque: 0.3 N (0.03 kgf, 0.07 lbf) 

    Fig 1: Checking Universal Joint Play
    G05662990Courtesy of SUBARU OF AMERICA, INC.
  2. Measure the swing torque of universal joint.

    Service limit: 

    Maximum load: 3.8 N (0.39 kgf, 0.86 lbf) or less 

    Fig 2: Measuring Swing Torque Of Universal Joint
    G05662991Courtesy of SUBARU OF AMERICA, INC.

    Service limit: 

    Maximum load: 3.8 N (0.39 kgf, 0.86 lbf) or less 

    Fig 3: Measuring Swing Torque Of Universal Joint
    G05662992Courtesy of SUBARU OF AMERICA, INC.

    Service limit: 

    Maximum load: 7.3 N (0.74 kgf, 1.64 lbf) or less 

    Fig 4: Measuring Swing Torque Of Universal Joint
    G05662993Courtesy of SUBARU OF AMERICA, INC.

    Service limit: 

    Maximum load: 7.3 N (0.74 kgf, 1.64 lbf) or less 

    Fig 5: Measuring Swing Torque Of Universal Joint
    G05662994Courtesy of SUBARU OF AMERICA, INC.