Steering Wheel: Installation

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Always refer to "Airbag System" before performing service on the airbag modules. <Ref. to CAUTION , General Description . >

Align the center position of the roll connector. <Ref. to ADJUSTMENT , Roll Connector . >
Install in the reverse order of removal.
NOTE: Align the alignment marks on the steering wheel and steering shaft.
Tightening torque:

39 N.m (4.0 kgf-m, 28.8 ft-lb)

Column cover-to-steering wheel clearance:

2 - 4 mm (0.08 - 0.16 in)

CAUTION: Insert the roll connector guide pin into the guide hole on the lower end of the steering wheel surface. Avoid damaging the pin.