Section 16 (Exhaust (H4SO)): Muffler: Installation

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE: Use a new gasket and self-locking nut.

Tightening torque: 48 N.m (4.9 kgf-m, 35.4 ft-lb)

LH side

Fig 1: Locating Rear Exhaust Pipe Nuts - LH Side
RH side

Fig 2: Locating Rear Exhaust Pipe Nuts - RH Side