LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Exterior/Interior Trim) >> Rear Gate Garnish >> Removal

Rear Gate Garnish: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear gate trim. < Ref. to REMOVAL , Rear Gate Trim. >
  2. Remove clip (A), and remove the rear gate panel side cover.
    Fig 1: Locating Rear Gate Panel Side Cover Clips
    G05023049
  3. Remove the hexagon cap nut.
    Fig 2: Identifying Hexagon Cap Nut
    G05023050
  4. Remove the nuts, disconnect each connector, and remove the rear gate garnish.
    Fig 3: Locating Rear Gate Garnish Nuts
    G05023051
scientia non olet · About LEMON Manuals