LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Exterior/Interior Trim) >> Instrument Panel Assembly >> Removal >> Steering Support Beam

Steering Support Beam

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel. < Ref. to INSTRUMENT PANEL (EXCLUDING STEERING SUPPORT BEAM) , REMOVAL, Instrument Panel Assembly. >
  2. Remove the steering shaft assembly. < Ref. to REMOVAL , Tilt Steering Column. >
  3. Remove all harness clips, and remove the harness from the steering support beam.
    NOTE: If necessary, make matching marks for easy reassembly.
  4. Remove the bolts and remove the steering support beam.
    Fig 1: Locating Steering Support Beam Bolts
    G05022992
  5. Remove the steering support beam bracket.
    Fig 2: Locating Steering Support Beam Bracket Bolts
    G05022993
scientia non olet · About LEMON Manuals