LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 142 (Security And Locks) >> Rear Gate Latch Assembly >> Removal

Rear Gate Latch Assembly: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the rear gate trim. < Ref. to REMOVAL , Rear Gate Trim. >
  3. Remove the two screws.
    Fig 1: Locating Rear Gate Latch Assembly Screws
    G05022812Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect connectors and cables of the rear gate handle.
    Fig 2: Identifying Rear Gate Lock Actuator Connector And Rear Gate Latch Switch Connector
    G05022813Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the rear gate latch assembly.
scientia non olet · About LEMON Manuals