LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Glass/Windows/Mirrors) >> Scalp Cap >> Replacement >> Model Without Side Turn Signal Light

Model Without Side Turn Signal Light

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the mirror. < Ref. to REPLACEMENT , Outer Mirror. >
  2. Press-in the clips (A) from inside of outer mirror.
    Fig 1: Locating Outer Mirror Clips
    G05022626Courtesy of SUBARU OF AMERICA, INC.
  3. Pull the scalp cap towards the front of the outer mirror, then remove the scalp cap.
  4. Align clip (A) on the reverse side of the scalp cap and the clip attachment hole of the outer mirror, and push the scalp cap in.
    Fig 2: Aligning Clip On Reverse Side Of Scalp Cap
    G05022627Courtesy of SUBARU OF AMERICA, INC.
  5. Install the scalp cap securely.
scientia non olet · About LEMON Manuals