LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Brake System) >> Stop Light Switch >> Removal

Stop Light Switch: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Disconnect the stop light switch connector.
  3. Loosen the nuts, and unscrew the stop light switch to remove.
Fig 1: Removing Stop Light Switch
G03833021Courtesy of SUBARU OF AMERICA, INC.